Topic: Network Operating System (NOS)

Management Metaswitch provides a modern management solution that employs NETCONF and YANG for control of all Integrated Control Plane products. It presents the ... Read More
Dataplane Integration (E.g. Broadcom) Metaswitch's Control Plane Model Layer (CPML) and Hardware Abstraction Layer (HAL) disaggregate the Metaswitch Control Plane from the underlying ... Read More
Layer 2 VPN Manager The Metaswitch L2VPN Manager enables the provisioning of E-LAN and E-LINE type services using MPLS-based L2VPNs. L2VPN Manager acts as a central ... Read More
Ethernet OAM Y.1731 Ethernet Continuity Check (ETH-CC) Confined to a domain or VLAN, multicast IEEE 802.1ag Ethernet Continuity Check (ETH-CC) heartbeat messages are ... Read More
Ethernet VPN (EVPN) Metaswitch DC-EVPN, combined with DC-BGP and DC-Label Manager, delivers a complete Ethernet VPN solution architected to serve the requirements of ... Read More
What is Network Function Disaggregation (NFD)? Network Function Disaggregation (NFD) defines the evolution of switching and routing appliances from proprietary, closed hardware and software ... Read More
Session Initiation Protocol (SIP) DC-SIP is a robust, high function, flexible, portable Session Initiation Protocol (SIP) toolkit, which addresses the requirements of carrier-grade ... Read More
Media Gateway Control Protocols and Megaco MGCP and Megaco/H.248 are the Media Gateway Control Protocols defined by the IETF and ITU-T for use in distributed switching environments. (Megaco ... Read More
Label Switched Paths Ping (LSP-Ping) Metaswitch’s LSP Ping solution is a library of functions that build and parse LSP Ping messages and manage the LSP Ping transactions. It is ... Read More
Ethernet Linktrace (ETH-LT) The IEEE 802.1ab Ethernet linktrace (ETH-LT) function is primarily responsible for restarting the adjacency relationship and helping to locate ... Read More
Ethernet Frame Loss Measurement (ETH-LM) One of the key objectives of OAM is to measure quality-of-service (QoS) attributes, such as frame delay, frame delay variation (“frame jitter”) and ... Read More
Ethernet Loopback (ETH-LB) The IEEE 802.1ab ETH-LB is unicast message used to check whether a fault occurs on the link between the local and peer terminal equipment. On ... Read More
Prev Next